Key Features
- Includes molded flares and traction pads for safety
- First patented 100% recycled lightweight plastic threshold ramp
- Safest surface in threshold design, much safer than aluminum
- Peel-and-stick tape included at no charge for immediate installation
- Suitable for wheelchairs, scooters, and electric chairs
- Can be vertically cut for height and notched to accommodate door jambs
- Slope complies with the Americans with Disabilities Act
- Made in the USA
Shim Johnny kits are available to increase the height to 1 1/2".
Why BigHorn™ Is Different from aluminum Ramps.
BigHorn™ Ramps are designed to perform where aluminum ramps can fall short, especially in wet, cold, and outdoor environments.
BigHorn™ Ramps will not freeze or become slippery in wet or cold conditions. Their unique recycled plastic composite technology conforms to the substrate, accommodating modest crowns and slopes at the threshold.
This makes BigHorn™ the only 100% recycled ramp that is extremely durable while also self-molding to the front and base of the threshold. Aluminum Ramps cannot conform in the same way. They sit rigid on an uneven substrate, conduct cold, and can become slick when wet.
For outdoor threshold ramps at exposed entrances, that difference shows up in the first winter. Molded, mitered ends provide a high-quality finished product that is desirable enough for even the most discerning homeowners and specifiers.
Slip Resistance and StoneCap™ Coating
StoneCap™ Coating is what makes BigHorn™ slip-resistant threshold ramps perform in wet and cold conditions.
The coating incorporates ceramic-coated quartz crystals bonded to the composite substrate. The result is an enduring surface that is UV-stable and guaranteed not to crack or fade. Molded traction pads add a second layer of grip and give the ramp an attractive geometric pattern rather than an industrial look.
Installation Method
BigHorn™ ADA threshold ramps install with the peel-and-stick adhesive tape included in every box, with no fasteners and no substrate preparation.
- Position the ramp against the existing threshold
- Cut vertically for height or notch for door molding using a standard rotary saw
- Apply the supplied peel-and-stick adhesive tape
- Add a shim kit where the rise is closer to 1 1/2 inches
Because the composite cuts cleanly with common jobsite tools, crews adjust on site rather than reordering. No curing time and no downtime at the opening.
Load Capacity
BigHorn™ Ramps are engineered for heavy load capabilities despite their lightweight construction.
The advanced recycled composite carries substantially more than the ramp's own weight suggests, which is why the product suits both residential entrances and steady commercial foot traffic.
Dimensions and Configurations
BigHorn™ Ramps ship in a standard 1 ¼-inch height and accommodate rises up to 1 1/2 inches with a shim kit.
- Standard height. 1 1/4 inches
- With shim kit. Up to 1 1/2 inches, adjustable on site in 1/4-inch increments
- Front edge. Gradual tapered front edge with molded 22-degree side slope
- Construction. Advanced hollow core design keeps the ramp lightweight without sacrificing strength
Color Options
BigHorn™ threshold ramps are available in many attractive colors, including Antique Bronze, Black, Brick Burgundy, California Sand, Dusted Cappuccino, Granite Grey, Nutmeg Brown, Silver Sand and Terra Cotta.
The granite and earth tone finishes blend with surrounding stone, stucco, and concrete, which matters on projects where the entrance has to look finished rather than retrofitted.
Project Suitability and Commercial Applications
BigHorn™ ADA threshold ramps work anywhere a door threshold creates a trip or rolling hazard.
- Commercial entrances. Interior and exterior doors where a small rise blocks access
- Multi-family housing. Unit doors, patios, and shared corridors across a portfolio
- Healthcare and senior living. High-traffic doorways requiring dependable traction
- Offices and retail. Finished appearance at customer-facing entrances
- Residential. Front doors, patio doors, and garage entries
These door threshold ramps suit both interior and exterior use, which is why outdoor threshold ramps at exposed entrances remain a core application.
Wholesale, Bulk, and Commercial Project Orders
SafePath Products® supplies BigHorn™ ADA threshold ramps in bulk for property portfolios, multi-site rollouts, and commercial specification packages.
- Support for Architects and Specifiers
We provide a dedicated design team that helps lay out projects for error-free installation. Send us the threshold conditions across the project, and we will confirm height, shim requirements, and color selection before anything is specified.
Every ramp arrives with peel-and-stick adhesive tape and installation instructions. The composite cuts and notches with standard rotary saws on-site, so a crew can fit an odd door jamb without a return trip or a reorder.
- Support for Facility Managers
Installation causes minimal disruption: there is no cure time and no fastening into the slab, just clean, dry-fit, and press into place with the included peel-and-stick tape. The StoneCap™ coating is UV-stable and designed for maintenance-free use, so ramps hold their appearance across the portfolio.
Bulk and Wholesale Ordering
- Volume pricing for multi-unit and multi-site projects
- Mixed color orders on one purchase order
- Shim kits supplied alongside bulk ramp orders
- Design team review before the order is placed
If you need help selecting the right product, contact our sales department, and our design team will help you find the best solution for your specific needs.
Request a Quote for bulk, wholesale, or multi-site BigHorn™ ADA threshold ramp pricing.
